• header_02
  • header0

Flow Meter Accessories

The Flow Governor is a protective device, installed downstream of the Flow Meter, to limit the flow rate through the Flow Meter, to the maximum Meter flow rate capacity. This becomes essential when the pump capacity is greater than the capacity of the Flow Meter or when a common pump is used for more than one Flow Meter.
Flow Governors
Preset Valves provide an accurate & automatic control of a pre-determined quantity of liquid to be delivered through the Flow Meter. A typical Preset arrangement consists of a Preset Valve mounted on the Flow Meter outlet & connected by a mechanical linkage to the Preset Register fitted below the Flow Meter Counter.
Preset Valves
 
The combination Line Strainer cum Air Eliminator ensures removal of solid impurities, air or vapour from the liquid before it enters the Flow Meter. It is an essential accessory for a trouble free & accurate Flow Meter operation.
Line Strainers cum Air Eliminators
The combination Offset Strainer cum Air Eliminator ensures removal of solid impurities, air or vapour from the liquid before it enters the Flow Meter. It is an essential accessory for a trouble free & accurate Flow Meter operation.
Offset Strainers cum Air Eliminators
The combination C35 Strainer cum Air Eliminator ensures removal of solid impurities, air or vapour from the liquid before it enters the Flow Meter. It is an essential accessory for trouble free & accurate Flow Meter operation.
C35 Strainers cum Air Eliminator
Air Separators efficiently separate & remove air or entrained gas from liquid products before they are metered. This is an essential requirement of any volume metering system for achieving a high measurement accuracy.
Air Separators
 
 
The C35 Preset Valve provides an accurate & automatic control of a predetermined quantity of liquid to be delivered through the Flow Meter. A typical Preset arrangement consists of a Preset Valve mounted on the Flow Meter outlet & connected by a mechanical linkage to the Preset Register fitted below the Flow Meter Counter.
C35 Preset Valves
 
Whenever an accurate indication of flow rate is required all Flow Meters can be supplied with a mechanical Rate of Flow Indicator. The unit is of a low torque design with an instantaneous response. It is ideally suited for test stands & wherever accurate flow rate indication is necessary.
Rate of Flow Indicators
 
We provides Teltech Extended Counter Drives have been specially designed for applications where the system design either requires elevation of the Flow Meter Mechanical Counter & Preset Register for better visibility or to protect Counter & Preset Register components when metering hot, cold or corrosive liquids.
Extended Counter Drives
 
 
Grounding Detector Unit is an electronic device which ensures safe & reliable grounding of generated electrostatic charges during loading or unloading operations of inflammable hydrocarbon products. The unit gives a local visual indication for proper grounding & transmits the signal to a remote loading control automation system.
Grounding Unit
 
Diaphragm Digital Control Valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The valve also offers an in-built flow governing function. 
Diaphragm Digital Control Valves
 
Piston Digital Control Valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The valve also offers an in-built flow governing function
Piston Digital Control Valves
 
 
Solid state Pulse Transmitter provides fast & accurate signaling for remote indication, totalizing & data monitoring systems. It is mounted directly on Flow Meter output shaft.
Pulse Transmitter